Introduction
Our Teak Veneer Edging is the essential solution for hiding the exposed edges of plywood, MDF, and particle board panels. Sourced from the same premium Tectona grandis as our dimensional lumber, this edge banding allows you to achieve the seamless look of solid teak at a fraction of the cost and weight.
We provide a variety of widths and thicknesses to suit every project, from delicate 1/2" trim for drawer sides to wide 2" banding for heavy shelving. Each roll is precision-cut and pre-sanded, ensuring a smooth transition between the face of your panel and its edge.
Technical Specifications and Options
Choosing the right type of edging is critical for the longevity of your cabinetry or furniture. We offer three primary formats:
|
Feature |
Pre-Glued (Hot Melt) |
Fleece-Backed (Non-Glued) |
Real Wood (Thick) |
|
Best For |
DIY, quick repairs |
Professional Edgebanders |
Heavy-use furniture |
|
Application |
Household iron or heat gun |
Contact cement or EVA glue |
Wood glue and clamps |
|
Thickness |
0.5mm - 0.6mm |
0.5mm - 0.6mm |
1.5mm - 3.0mm |
|
Flexibility |
High (for curves) |
High |
Rigid (straight lines) |
Key Advantages of Genuine Teak Edging
Seamless Aesthetic Integration
Unlike "PVC Teak" or plastic laminates, our real wood veneer edging contains the natural pore structure and grain depth of genuine teak. When stained or oiled, it reacts identically to your teak plywood, ensuring the "solid wood" illusion remains unbroken.
High-Strength Bonding
Our pre-glued options utilize a high-performance hot-melt adhesive that activates quickly and sets permanently. For marine and high-humidity environments, our fleece-backed edging provides a stable surface for specialized waterproof adhesives.
Finger-Jointed for Continuity
Our rolls are manufactured using high-precision finger joints. This allows for long, continuous runs (up to 250 feet) without the distracting color jumps or gaps often found in lower-quality veneer products.
Pre-Sanded Surface
Every linear foot is factory-sanded to a 150-180 grit finish. This reduces the amount of labor required after application and prevents "burn-through" of the thin veneer during final shop sanding.
Common Applications
Cabinet Doors and Shelving
Providing a durable, matching edge for teak plywood kitchen or bathroom cabinets.
01
Marine Joinery
Finishing exposed plywood edges in yacht galleys and cabin soles.
02
Furniture Refacing
Upgrading old desks or bookshelves with a premium hardwood exterior.
03
Architectural Slats
Capping the ends of decorative wall battens and ceiling panels.
04
FAQ: Professional Tips for Teak Edging
Q: How do I trim the excess edging after it is glued?
A: We recommend using a dedicated double-edge trimmer or a sharp chisel held at a slight angle. Always trim in the direction of the grain to prevent splintering. A final pass with a sanding block (220 grit) at a 45-degree angle will "break" the edge for a smooth, professional feel.
Q: Can I use Teak edging for curved or round table tops?
A: Yes. Our 0.6mm fleece-backed and pre-glued edging is highly flexible. For very tight radiuses, a light application of heat will make the wood fibers more pliable, allowing the veneer to wrap around corners without cracking.
Q: Does the oil in Teak affect the glue?
A: Our factory-applied hot-melt glue is formulated to bond with oily hardwoods. If you are using non-glued fleece-backed edging with contact cement, we recommend a quick wipe of the back of the veneer with acetone to ensure maximum adhesion.
Q: Is the edging wide enough to cover "3/4 inch" plywood?
A: Yes. We typically recommend using 7/8" wide edging for a standard 3/4" (19mm) panel. This provides a 1/16" overhang on both sides, which is essential for accurate trimming and a flush finish.
Q: Will the edging turn silver-gray like solid Teak?
A: If used outdoors and left untreated, yes. However, since edge banding is thin, we strongly recommend sealing it with a UV-inhibiting finish to prevent the glue line from breaking down due to weather exposure.