Teak Wood Flooring

Product Overview

Teak Wood Flooring utilizes natural Tectona grandis recognized for dimensional stability and natural oleoresin content. This dense hardwood resists moisture ingress and fungal degradation without chemical impregnation. Mills process sustainably managed plantation teak into precision-profiled solid planks and multi-layer engineered boards, supplying architectural contractors, commercial developers, and regional flooring distributors worldwide.

First 12 3 Last

Product Types & Options

Solid Teak Flooring

Milled from single pieces of lumber, featuring standard tongue-and-groove profiles with micro-bevel or square edges for direct nail-down or glue-down installation.

Engineered Teak Flooring

Constructed with a 3mm to 6mm genuine teak top wear layer laminated onto a cross-banded multi-layer plywood core, minimizing seasonal expansion and contraction.

Unfinished Raw Planks

Supplied sanded to 120-grit for on-site custom staining, oiling, or finishing.

Factory-Finished Planks

Pre-coated on UV-cured production lines with anti-scratch coatings or penetrating natural oils to reduce on-site labor time.

Material & Wood Characteristics

Density

Dry density ranges between 650 kg/m3 to 750 kg/m3 at 12% moisture content.

Natural Oils

High concentration of natural teak oils provides intrinsic moisture resistance and surface slip reduction.

Janka Hardness

Measures approximately 1,070 lbf (4,740 N), balancing impact resistance with machinability.

Grain & Texture

Straight to wavy grain patterns with a coarse texture, transitioning from golden-brown to a silver-grey patina under UV exposure if left unfinished.

Specifications & Grades

Technical Parameter	Standard Specification
Thickness (Solid)	15mm / 18mm / 20mm
Thickness (Engineered)	14mm / 15mm / 20mm (Wear layer: 3mm / 4mm / 6mm)
Width Options	90mm / 120mm / 150mm / 190mm (Custom up to 240mm)
Length Profiles	Random lengths 600mm to 2200mm
Moisture Content (MC)	Controlled at 8% to 12% prior to packaging
Grading Rules	FAS Clear Grade, Prime Grade, and Rustic Grade

FAS Clear Grade

Minimal knots, uniform color tone, and straight grain alignment.

Prime Grade

Small pin knots and natural sapwood variations permitted within strict thresholds.

Rustic Grade

Live knots, color variations, and mineral streaks included for dynamic architectural aesthetics.

Processing & Surface Options

01/

Kiln-Drying: Multi-stage computer-controlled kiln cycles eliminate internal stress, checking, and honeycombing.

02/

Profiling: Precision four-side moulders ensure tight tongue-and-groove tolerances (plus or minus 0.15 mm), preventing installation gaps.

03/

Surface Textures: Smooth precision-sanded, wire-brushed, or hand-scraped profiles.

04/

Edge Details: Micro-bevel (1mm) or square edge configurations.

Applications

Hospitality & Resorts

High-traffic hotel lobbies, guest suites, and spa interiors.

Commercial Offices

Executive boardrooms, reception areas, and retail flagships.

Marine & Yacht Interiors

Cabin flooring and architectural bulkheads.

Residential Developments

Luxury multi-family residential complexes and custom single-family homes.

Manufacturing & Quality Control

Raw Material Sourcing: Procured strictly from legal, traceable plantation forests holding valid forestry management documentation.

Moisture Meter Testing: Inline electronic pin-type sensors reject boards failing the 8% to 12% MC specification window.

Visual & Dimensional Sorting: Automated grading lines combined with manual inspection check for warp, bow, twist, and milling defects.

Packaging Standards: Wrapped in heavy-duty polyethylene film, strapped on fumigated plywood pallets, and reinforced with corner protectors for ocean freight.

Customization & OEM / Supply Options

Custom Dimensions

Non-standard widths, extra-long fixed lengths, and bespoke thickness profiles milled to architectural blueprint specifications.

OEM Packaging

Custom carton printing, barcode labeling, and protective film branding for private-label distributors.

Supply Capacity

Regular monthly container allocation (FCL) managed via direct port logistics.

Selection Guide

Evaluate Subfloor Environment

Choose engineered teak for concrete subfloors with potential subfloor moisture or radiant heating systems. Select solid teak for traditional joist or plywood subfloors in stable humidity environments.

Determine Traffic Level

High-traffic commercial zones require 4mm to 6mm wear-layer engineered planks or 18mm solid planks to allow future re-sanding cycles.

Select Finish Type

Specify factory UV-cured finishes for accelerated project completion, or unfinished profiles for custom on-site oil finishes matching specific design palettes.

FAQ

Q: What is the standard moisture content of your teak flooring when shipped, and how do you prevent warping during ocean transit?

A: Kiln-dried lumber is stabilized to an internal moisture content of 8% to 12%. Container shipments utilize moisture-barrier polyethylene wrapping, silica gel desiccant bags, and pallet ventilation spacers to prevent humidity condensation during maritime transit.

Q: Can your engineered teak flooring be installed over radiant floor heating systems?

A: Yes. Engineered teak profiles with multi-layer cross-banded plywood cores distribute thermal stress evenly. Surface temperature of the subfloor must not exceed 27 degrees Celsius (80 degrees Fahrenheit), and relative humidity must remain between 45% and 60%.

Q: What grading standards do you follow for knot size and color variation?

A: Grading follows international hardwood rules adapted for tropical timber. FAS clear grade limits knots and color shifts. Rustic grade permits sound tight knots up to 25mm and natural heartwood-to-sapwood contrast. Detailed grading rules are supplied in technical documentation.

Q: Do you provide documentation proving the legal and sustainable origin of the teak wood?

A: Yes. Sourcing complies with timber legality frameworks. Documentation including harvest permits, chain-of-custody certificates, and import declaration support files are provided for commercial customs clearance.

Q: What is the standard production lead time for bulk container orders (FCL)?

A: Standard mill production lead time requires 30 to 45 days following deposit receipt and technical drawing sign-off. Exact schedules depend on container volume, custom profiling requirements, and shipping destinations.

Q: What are the minimum order quantities (MOQ) for custom-milled dimensions or private-label packaging?

A: Standard MOQ is one 20-foot container (approximately 800 to 1,200 square meters depending on flooring thickness and width). Split-width packaging within a container is negotiable based on total project scale.

With abundant experience, we are one of the most professional teak wood flooring manufacturers and suppliers in China. Please rest assured to buy bulk high quality teak wood flooring for sale here from our factory. If you have any enquiry about cooperation, please feel free to email us.

Teak Wood Outdoor Flooring, Teak Wood Flooring Outdoor, Reclaimed Teak Flooring