Introduction
Our Unfinished Teak Flooring represents the raw, natural beauty of Tectona grandis in its purest form. Unlike prefinished options that come with factory-applied coatings, unfinished teak allows architects and homeowners to determine the exact sheen, texture, and protective seal after the floor is installed. This ensures a perfectly level surface and a seamless color match with other custom millwork in the property.
Each plank is kiln-dried and precision-milled with a tongue-and-groove profile, featuring the high heartwood content and natural oils that have made teak the world's most coveted timber for centuries. By choosing unfinished stock, you gain the ability to use specialized European oils, high-traffic water-based polyurethanes, or traditional wax finishes that factory lines simply cannot replicate.
Technical Specifications and Grade Profiles
Our unfinished inventory is strictly graded to ensure a consistent canvas for your local finishing professional.
|
Feature |
Specification |
|
Botanical Name |
Tectona grandis (Genuine Teak) |
|
Construction |
3/4" Solid or 5/8" Engineered (with thick wear layer) |
|
Surface |
Raw, square-edged or micro-beveled; sanded to 120 grit |
|
Moisture Content |
Kiln-Dried to 8%–10% |
|
Widths |
3", 4", 5", and 6" (Custom wide-plank options available) |
|
Janka Hardness |
1,000–1,150 lbf |
Key Advantages of Unfinished Teak
Total Aesthetic Control
Unfinished teak allows you to "fine-tune" the color. If the raw wood shows significant variegated streaks, a professional finisher can use specialized wood conditioners or tinted oils to harmonize the tones across the entire floor before the final topcoat is applied.
Truly Flush Surface (Site-Sanded)
When unfinished flooring is installed, the entire surface is sanded on-site. This eliminates "over-wood" (slight height differences between planks) and creates a perfectly flat, monolithic surface. This is particularly important for modern, minimalist designs where micro-bevels (the tiny grooves between prefinished boards) are not desired.
Seamless Transitions and Custom Vents
By finishing the floor on-site, you can ensure that matching stair treads, transitions, and flush-mount floor vents are stained and sealed at the same time using the same batch of finish. This creates a cohesive, high-end look throughout the architectural space.
Access to Specialized Finishes
For maritime-themed homes or "wet-zone" interiors (like spa rooms), you may require specialized finishes like Tung Oil or Marine-Grade Varnish. Unfinished teak is the only way to utilize these deep-penetrating or high-build protectors that are not available in standard factory-finished flooring.
Primary Applications
Custom Luxury Estates
Where the flooring must be perfectly color-matched to custom cabinetry and doors.
01
Historical Restorations
Replacing or extending original teak floors in mid-century or colonial-style homes.
02
High-End Yacht Interiors
Allowing for the application of specific non-slip or high-gloss marine coatings.
03
Modern Minimalist Lofts
Creating a seamless, bevel-free floor that mimics a continuous wooden slab.
04
Frequently Asked Questions (FAQ)
Q: Does unfinished teak look "green" or "dark" when it first arrives?
A: Yes. Freshly milled teak often has "shadowing"-streaks of dark brown or even dull green. This is perfectly normal for the species. Once the floor is installed and exposed to light, those minerals stabilize, and the wood transforms into a uniform golden-brown.
Q: Is it harder to maintain an unfinished floor?
A: Once it is sealed on-site, the maintenance is identical to any other hardwood floor. The term "unfinished" only refers to the state in which it is shipped and installed; it must be sealed after installation to protect the wood.
Q: Which finish is best for highlighting the "Golden" look?
A: Water-based polyurethanes tend to keep the wood lighter and more "natural," while oil-based finishes or hardwax oils will "amber" the wood, giving it a deeper, richer honey-gold glow.
Q: Can I walk on the floor before it is finished?
A: It is best to avoid walking on raw teak with shoes, as the wood is porous and can absorb oils or dirt from soles. If you must walk on it during installation, use clean socks or cover the high-traffic paths with breathable floor protection.
Q: Do you offer unfinished engineered teak?
A: Yes. We offer unfinished engineered planks with a thick 4mm to 6mm wear layer. This allows for the same on-site sanding and finishing as solid wood but provides the stability needed for installation over concrete or radiant heat.